Optimization Research of Buckling Restrained Brace Composite Frame based on Lateral Stiffness Ratio

王宏伟; 叶达伟; 覃建华; 周云

doi:10.13409/j.cnki.jdpme.2018.03.008

您当前的位置：

首页 >

文章列表页 >

Optimization Research of Buckling Restrained Brace Composite Frame based on Lateral Stiffness Ratio

更新时间：2025-12-11

- Optimization Research of Buckling Restrained Brace Composite Frame based on Lateral Stiffness Ratio
- Vol. 38, Issue 3, Pages: 458-464+471(2018)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：10.13409/j.cnki.jdpme.2018.03.008
  CLC： U398.9
- Published：2018
- 稿件说明：
移动端阅览
[1]王宏伟,叶达伟,覃建华,周云.基于抗侧刚度比的防屈曲支撑组合框架优化研究[J].防灾减灾工程学报,2018,38(03):458-464+471.

王宏伟, 叶达伟, 覃建华, et al. Optimization Research of Buckling Restrained Brace Composite Frame based on Lateral Stiffness Ratio[J]. 2018, 38(3): 458-464+471.
[1]王宏伟,叶达伟,覃建华,周云.基于抗侧刚度比的防屈曲支撑组合框架优化研究[J].防灾减灾工程学报,2018,38(03):458-464+471. DOI： 10.13409/j.cnki.jdpme.2018.03.008.

王宏伟, 叶达伟, 覃建华, et al. Optimization Research of Buckling Restrained Brace Composite Frame based on Lateral Stiffness Ratio[J]. 2018, 38(3): 458-464+471. DOI： 10.13409/j.cnki.jdpme.2018.03.008.

摘要

针对某26层设置了防屈曲支撑的钢管混凝土组合框架的benchmark模型

以振型分解反应谱法作为基础算法

编制了基于遗传算法的优化程序

通过改变结构各层的抗侧刚度比

对设置防屈曲支撑的钢管混凝土组合框架结构进行了防屈曲支撑截面面积的优化设计

对以变化抗侧刚度比设计的结构和以固定抗侧刚度比设计的结构进行了弹性阶段和弹塑性阶段的地震响应对比分析。结果表明:以变化抗侧刚度比设计的结构能在不减弱抗震性能的同时

减少48%的防屈曲支撑用量。在罕遇地震作用下

以变化抗侧刚度比设计的防屈曲支撑的耗能比例达54.98%

充分发挥防屈曲支撑的塑性变形能力消耗地震能量

起到保护框架梁、柱的作用。

Abstract

According to a 26-storey benchmark model of concrete-filled steel tubular（CFST）composite frame with buckling restrained brace（BRB）

an optimization program was designed based on mode response spectrum method and genetic algorithm.The optimal design of cross-sectional area of BRB for CFST composite frame was presented by calculating the lateral stiffness ratio of each storey.Moreover

the seismic response during elastic and elastic-plastic stages was analyzed for of the structure designed with varying or fixed lateral stiffness ratios.The results show that the structure designed with varying lateral stiffness ratios can reduce the consumption of 48% of BRB while maintaining earthquake-resistant properties.Under the influence of rarely occurred strong earthquakes

the energy dissipation ratio of the BRB designed with varying lateral stiffness ratio is 54.98%

and the plastic deformation capacity of the BRB can effectively consume earthquake energies

which protects the beams and columns from damage.

关键词

Keywords

references

基于抗侧刚度比的防屈曲支撑钢框架住宅设计及分析 [J]. 王宏伟,苑清山,叶达伟,赵志东,覃建华. 钢结构 . 2017(02)

抗侧刚度比对防屈曲支撑钢框架结构地震响应和能量分配的影响 [J]. 任乐明,钟铁毅. 北京交通大学学报 . 2014(03)

基于遗传算法的抗震钢框架多目标优化设计 [J]. 黄冀卓,王湛. 力学学报 . 2007(03)

防屈曲支撑框架设计理论研究 [D]. 赵瑛. 清华大学 2009

Perform-3D在抗震弹塑性分析与结构性能评估中的应用[M]. 中国建筑工业出版社 , 刘博文, 2014

MATLAB遗传算法工具箱及应用[M]. 西安电子科技大学出版社 , 雷英杰, 2014

防屈曲耗能支撑结构设计与应用[M]. 中国建筑工业出版社 , 周云, 2007

结构振动控制[M]. 科学出版社 , 欧进萍著, 2003

Views

154

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Seismic Performance Analysis and Design of a Mega Structure with Buckling Restraining Braces under Super-strong Earthquake

Journal of Disaster Prevention and Mitigation Engineering Vol.34 2014 CONTENTS

Research on Location Optimization of Seismic Reduction Device Based on Improved Genetic Algorithm

Elastoplastic Model for Buckling-restrained Braces:Response and Response Sensitivity Analysis

Seismic Simulation and Economic Analysis of Structure with Buckling-restrained Braces

Related Author

欧进萍

王建

康谨之

李爱群

徐庆阳

丁幼亮

张志强

胡灿阳

Related Institution

No data

⁰