高文华, 刘正, 朱建群. MCVISC Rheological Model and Its Realization in FLAC3D Program[J]. 2015, 35(2): 219-225. DOI: 10.13409/j.cnki.jdpme.2015.02.013.
MCVISC Rheological Model and Its Realization in FLAC3D Program
摘要
进行了某地粉矿岩试件在单轴条件下分级增量循环加、卸载蠕变试验
得出该粉砂岩具有瞬弹、衰减蠕变、等速蠕变等阶段特征。通过对西原模型的改进
建立了一个能全面反映粉砂岩瞬弹、衰减蠕变、稳定蠕变的线性蠕变模型
即MCVISC模型。以此为基础
推导了蠕变本构模型三维状态下的有限差分形式。在Visual C++语言的环境下
利用FLAC3D所提供的二次开发接口进行了自定义模型的程序研制
给出了模型二次开发的程序流程和代码编写中的关键技术
并对程序的正确性和可靠性进行了验证和算例分析。结果表明
无论是应变量值还是蠕变整体变化趋势
数值模拟结果与室内蠕变试验结果吻合较好
说明了开发的蠕变本构模型的正确性和适用性。
Abstract
By means of stepwise incremental cycling loading and unloading
the test of siltstone specimen was done under uniaxial condition.The test results show that the siltstone possesses characteristics of instantaneous elasticity
decay
stable creep
etc.stages.The MCVISC creep model was set up which can overall reflect these properties through improved Nishihara model
and the creep constitutive model of finite difference form for three-dimensional state was deduced.Using second development program interface of FLAC3 Dwith the Visual C++language
the program of user-defined model was developed
and the program flowchart and the key technique of code compiling were given.At the same time
the correctness and reliability of program compiling were verified through cases.The results show that numerical simulating result coincides with test one for either strain level or overall tendancy of creep
which indicates that the developed model is effective and feasible.