Computational Modeling of Cold-formed Lipped Channels with Slotted Webs for Fire-performance Analysis

马奇杰; 王培军; 郑英杰

doi:10.13409/j.cnki.jdpme.2012.02.015

您当前的位置：

首页 >

文章列表页 >

Computational Modeling of Cold-formed Lipped Channels with Slotted Webs for Fire-performance Analysis

更新时间：2025-12-11

- Computational Modeling of Cold-formed Lipped Channels with Slotted Webs for Fire-performance Analysis
- Vol. 32, Issue 2, Pages: 205-209(2012)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：10.13409/j.cnki.jdpme.2012.02.015
  CLC： U392.1
- Published：2012
- 稿件说明：
移动端阅览
[1]马奇杰,王培军,郑英杰.腹板开槽冷弯薄壁卷边槽钢抗火性能有限元分析模型[J].防灾减灾工程学报,2012,32(02):205-209.

马奇杰, 王培军, 郑英杰. Computational Modeling of Cold-formed Lipped Channels with Slotted Webs for Fire-performance Analysis[J]. 2012, 32(2): 205-209.
[1]马奇杰,王培军,郑英杰.腹板开槽冷弯薄壁卷边槽钢抗火性能有限元分析模型[J].防灾减灾工程学报,2012,32(02):205-209. DOI： 10.13409/j.cnki.jdpme.2012.02.015.

马奇杰, 王培军, 郑英杰. Computational Modeling of Cold-formed Lipped Channels with Slotted Webs for Fire-performance Analysis[J]. 2012, 32(2): 205-209. DOI： 10.13409/j.cnki.jdpme.2012.02.015.

摘要

位于冷弯薄壁型钢构件腹板的槽孔

可延长构件两边的热量传递路线

减弱冷弯薄壁钢构件作为墙板龙骨引起的冷桥效应。常温下冷弯薄壁构件的屈曲破坏模态已非常复杂

包括整体屈曲、局部屈曲和畸变屈曲等

且不同的屈曲破坏模态可能会相互影响。火灾下冷弯薄壁构件的破坏机理将更为复杂

根据常规的稳定理论难以求解其火灾下的临界荷载。本文利用有限元方法对火灾下腹板开槽冷弯薄壁卷边槽钢的受力性能进行了模拟

研究了单元类型、材料模型、初始几何缺陷以及求解方法等因素对分析结果的影响

为同类构件抗火性能的有限元模拟分析提供了建模依据。

Abstract

Due to the function to prolong the heat transfer route between one side of the member and the other side

the slots in the webs of cold-formed thin-walled steel members can reduce the bridge effect notably.At ambient

the failure modes of cold-formed thin-walled steel members are very complex

including global buckling

local buckling and distortional buckling.Different failure modes can interact on each other.The failure modes of cold-formed thin-walled steel members will be much more complicated in fire.So it’s difficult to get its critical load by using the general stability theory.The authors take use of the finite element method to investigate the mechanical properties of cold-formed thin-walled steel members in fire

taking the factors of element type

material model

initial geometric imperfection magnitude and solution scheme into consideration.At meantime this article offers some advice on the computational modeling of cold-formed thin-walled steel members for fire-performance analysis.

关键词

Keywords

references

高强冷弯薄壁卷边槽钢柱在高温下的性能 [J]. 陈驹,金伟良. 工程力学 . 2009(12)

腹板开孔标准轻钢龙骨力学性能比较研究 [J]. 左宏亮,武胜. 大连理工大学学报 . 2009(06)

轻钢龙骨腹板开孔参数对复合墙体传热的影响 [J]. 王昭俊,崔永旗,张素梅. 哈尔滨商业大学学报(自然科学版) . 2007(01)

腹板开孔轻钢龙骨复合墙体截面参数对传热的影响 [J]. 王昭俊,崔永旗,张素梅. 哈尔滨工业大学学报 . 2006(10)

薄壁构件稳定理论及其应用[M]. 科学出版社 , 周绪红, 2009

Computational modeling of cold-formed steel [J] . B.W. Schafer,Z. Li,C.D. Moen. Thin-Walled Structures . 2010 (10)

Imperfection sensitivity analysis of lipped channel columns at high temperatures [J] . O. Kaitila. Journal of Constructional Steel Research . 2002 (3)

Thermal evaluation of several configurations of insulation and structural materials for some metal stud walls [J] . Jan Kosny,Jeffrey E. Christian. Energy & Buildings . 1995 (2)

Views

109

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experimental Study on the Mechanical Performance of Stonelightweight Aggregate Concrete Filled Steel Tubular Stub Column under Axial Compression

Numerical Simulation Analysis on Mechanical Behavior of Axially Loaded Reactive Powder Concrete Filled Steel Tube Short Columns

Study of Ultimate Bearing Capacity of Skirt Strip Foundation over Undrained Clay

Research on Design Parameters of RC Axial Compression Column Strengthened by Reinforced Concrete Jacketing

Study on Computation Method of the Ultimate Bearing Capacity of Two-layer Foundation with Sand over Soft Clay

Related Author

杨健辉

牛海成

王兴国

邝肖梅

张向冈

何晗欣

张春尧

王杨

Related Institution

No data

⁰