纸质出版:2018
移动端阅览
[1]王学滨,陈忠元,郭瑞,郭翔,芦伟男.预设V形缺口的单向拉伸岩样变形-开裂过程模拟——基于连续-非连续方法[J].防灾减灾工程学报,2018,38(02):209-215.
王学滨, 陈忠元, 郭瑞, et al. Modeling of Deformation-cracking Processes of Rock Specimens with V-shaped Notches in Uniaxial Tension——Based on a Continuum-discontinuum Method[J]. 2018, 38(2): 209-215.
[1]王学滨,陈忠元,郭瑞,郭翔,芦伟男.预设V形缺口的单向拉伸岩样变形-开裂过程模拟——基于连续-非连续方法[J].防灾减灾工程学报,2018,38(02):209-215. DOI: 10.13409/j.cnki.jdpme.2018.02.002.
王学滨, 陈忠元, 郭瑞, et al. Modeling of Deformation-cracking Processes of Rock Specimens with V-shaped Notches in Uniaxial Tension——Based on a Continuum-discontinuum Method[J]. 2018, 38(2): 209-215. DOI: 10.13409/j.cnki.jdpme.2018.02.002.
利用自主开发的连续-非连续方法
通过在岩样左、右两侧预设V形缺口
开展了拉伸位移控制加载条件下岩样变形-开裂过程的数值模拟研究。研究发现:在节点分离前
最大主应力集中于V形缺口尖端附近;在节点分离后
最大主应力集中于裂缝尖端附近;岩样中节点分离是由外及里逐渐发生;由于岩样内部一定尺寸弹性核心的存在
即使岩样发生少许节点分离
岩样承载能力也不会下降
但刚度会劣化;在节点分离不久
分离节点的法向张开度和法向力均呈现一定的非线性
这可能与分离节点周围单元应力分布不均匀和未考虑切向力等因素有关;网格加密后
V形缺口的尺寸相应降低
这导致载荷-位移曲线的峰值提升
该曲线的峰前和峰后部分变陡;分离节点的法向张开度和法向黏聚力随时间的演变曲线几乎不存在网格依赖性。对文中的多种数值结果的正确性进行了检验。
A continuum-discontinum method developed by the authors is used to numerically simulate the deformation-cracking processes of rock specimens with V-shaped notches in displacementcontrolled uniaxial tension tests.The following results are found.Prior to and beyond the nodal separation
the maximum principal stresses are concentrated at tips of notches and cracks.Separation of nodes in rock specimens is from the outside to the inside.If an elastic core with a certain size appears
the load-bearing capacity of the specimen may not decrease
but the stiffness decreases because several nodes have separated in the specimen.Shortly after nodes separated
normal forces and normal opening displacements of separating nodes exhibit non-linearity
which is possibly related to the nonuniform distribution of stress around the separating nodes and the neglect of the tangential force.After the mesh is refined
the maximum load-bearing capacity of the specimen increases and the pre-peak and post-peak parts of the load-displacement curve become steep.Normal force-time curves and normal opening displacement-time curves are almost size-independent.Numerical results are verified on several aspects.
单层采动诱发长壁开采水平岩层开裂、冒落过程模拟——基于连续-非连续方法 [J]. 王学滨,郭翔,芦伟男,齐大雷. 防灾减灾工程学报 . 2018(01)
山西太原盆地地裂缝与地下水开采、地面沉降关系分析 [J]. 孙晓涵,彭建兵,崔向美,蒋臻蔚. 中国地质灾害与防治学报 . 2016(02)
地裂缝环境下不同隧道型式的地铁振动响应数值分析 [J]. 杨觅,门玉明,袁立群,杨龙伟. 防灾减灾工程学报 . 2016(02)
汶川地震震裂山体裂缝变形特征与动力机制研究 [J]. 袁进科,裴向军. 防灾减灾工程学报 . 2015(06)
一种模拟岩体裂纹扩展的三角单元网格开裂技术 [J]. 常鑫,程远方,夏强平,韩修廷. 中国石油大学学报(自然科学版) . 2015(03)
Three-dimensional FDEM numerical simulation of failure processes observed in Opalinus Clay laboratory samples [J]. Omid Mahabadi,Patrick Kaifosh,Paul Marschall,Tim Vietor. Journal of Rock Mechanics and Geotechnical Engineering . 2014(06)
DDA子块体开裂模拟算法的优化与验证 [J]. 倪克松,甯尤军. 地下空间与工程学报 . 2014(05)
粒状材料颗粒破碎过程分析 [J]. 魏巍,覃燕林,曹鹏,刘恩龙,陈生水. 南水北调与水利科技 . 2014(06)
A review of discrete modeling techniques for fracturing processes in discontinuous rock masses [J]. A.Lisjak,G.Grasselli. Journal of Rock Mechanics and Geotechnical Engineering . 2014(04)
基于局部单元劈裂的FEM/DEM自适应分析方法 [J]. 严成增,孙冠华,郑宏,葛修润. 岩土力学 . 2014(07)
断裂问题的扩展有限元法研究 [J]. 茹忠亮,朱传锐,张友良,赵洪波. 岩土力学 . 2011(07)
锦屏一级水电站左岸卸荷拉裂松弛岩体灌浆加固研究 [J]. 裴向军,黄润秋,李正兵,罗建林. 岩石力学与工程学报 . 2011(02)
模拟三维裂纹问题的扩展有限元法 [J]. 余天堂. 岩土力学 . 2010(10)
基于扩展有限元法的粘聚裂纹模型 [J]. 方修君,金峰,王进廷. 清华大学学报(自然科学版) . 2007(03)
用三维离散元实现混凝土Ⅰ型断裂模拟 [J]. 侯艳丽,张楚汉. 工程力学 . 2007(01)
岩石(土)类材料拉张破坏的有限元法分析[M]. 北京师范大学出版社 , 王来贵, 2011
A bonded-particle model for rock [J] . D.O. Potyondy,P.A. Cundall. International Journal of Rock Mechanics and Mining Sciences . 2004 (8)
0
浏览量
88
下载量
2
CSCD
关联资源
相关文章
相关作者
相关机构
苏公网安备32010202012147号
