火灾下蜂窝梁孔间腹板受剪弹性屈曲简化设计方法

王培军; 郭康瑞; 张露露

doi:10.13409/j.cnki.jdpme.2016.03.018

您当前的位置：

首页 >

文章列表页 >

火灾下蜂窝梁孔间腹板受剪弹性屈曲简化设计方法

钢结构抗火 | 更新时间：2025-12-11

- 火灾下蜂窝梁孔间腹板受剪弹性屈曲简化设计方法
- Shear Buckling Strengths of Web-posts in a Castellated Steel Beam with Hexagonal Web Openings in a Fire
- 防灾减灾工程学报 2016年36卷第3期页码：432-437
- 作者机构：
- 作者简介：
- 基金信息：
  
  国家自然科学基金项目（51578322）;山东省自然科学基金项目（ZR2015EM041）资助
- DOI：10.13409/j.cnki.jdpme.2016.03.018
  中图分类号： U392.1
- 纸质出版：2016
- 稿件说明：
移动端阅览
[1]王培军,郭康瑞,张露露.火灾下蜂窝梁孔间腹板受剪弹性屈曲简化设计方法[J].防灾减灾工程学报,2016,36(03):432-437.

王培军, 郭康瑞, 张露露. Shear Buckling Strengths of Web-posts in a Castellated Steel Beam with Hexagonal Web Openings in a Fire[J]. 2016, 36(3): 432-437.
[1]王培军,郭康瑞,张露露.火灾下蜂窝梁孔间腹板受剪弹性屈曲简化设计方法[J].防灾减灾工程学报,2016,36(03):432-437. DOI： 10.13409/j.cnki.jdpme.2016.03.018.

王培军, 郭康瑞, 张露露. Shear Buckling Strengths of Web-posts in a Castellated Steel Beam with Hexagonal Web Openings in a Fire[J]. 2016, 36(3): 432-437. DOI： 10.13409/j.cnki.jdpme.2016.03.018.

摘要

运用有限元方法研究了火灾下六边形孔蜂窝梁在竖向剪力作用下孔间腹板弹性屈曲问题。取孔间腹板的上半部作为隔离体

将蜂窝梁的孔间腹板等效为受水平剪力的楔形悬臂板。根据薄板受剪屈曲理论计算公式

通过屈曲系数k计算孔间腹板受剪屈曲承载力。运用有限元分析获得蜂窝梁竖向剪切屈曲承载力

通过反分析计算屈曲系数k。结果表明:k随着孔间腹板宽厚比和孔洞上方腹板高厚比的增大而非线性减小;随着孔间腹板高厚比的增大而线性增大;随着腹板厚度的增大而线性减小;随火灾升温基本保持不变。在参数分析的基础上

提出了火灾下六边形孔蜂窝梁受剪屈曲系数k的计算公式

简化了蜂窝梁孔间腹板屈曲承载力的设计过程。

Abstract

Shear buckling behavior of web-post in a Castellated Steel Beam（CSB）with hexagonal web openings under vertical shear in a fire were investigated with finite element method.By studying buckling behavior of the upper part of the web-post under horizontal shear force

the shear buckling problems of web-post could be replaced by those of a suspended wedge plate under horizontal shear force.The shear buckling strength of the wedge plate could be obtained

if the shear buckling coefficient k was provided.After obtaining the vertical shear buckling strength of a CSB by using finite element analysis

the shear buckling coefficient kwas obtained by inverse analysis.Research results show that kdecreases non-linearly with the increase of web-post width to thickness ratio and web height of Tee-section to thickness.kincreases linearly with the increase of web-post height to thickness ratio.And it decreases linearly with web thickness.kis nearly kept consistent with elevated temperatures Tin a fire.Practical calculating method for kin a fire is proposed as results of a systematic parameter analysis

which greatly simplifies the shear buckling design of web-post.

关键词

Keywords

references

CECS 200-2006. 建筑钢结构防火技术规范 [S]. 2006

Novel simplified equations for Vierendeel design of beams with （elongated） circular openings [J] . Pattamad Panedpojaman,Thaksin Thepchatri,Suchart Limkatanyu. Journal of Constructional Steel Research . 2015

Investigation on Vierendeel mechanism failure of castellated steel beams with fillet corner web openings [J] . Peijun Wang,Qijie Ma,Xudong Wang. Engineering Structures . 2014

Vertical shear buckling capacity of web-posts in castellated steel beams with fillet corner hexagonal web openings [J] . Peijun Wang,Xudong Wang,Ning Ma. Engineering Structures . 2014

Meshless local buckling analysis of steel beams with irregular web openings [J] . A.R. Zainal Abidin,B.A. Izzuddin. Engineering Structures . 2012

Design of composite asymmetric cellular beams and beams with large web openings [J] . R.M. Lawson,J. Lim,S.J. Hicks,W.I. Simms. Journal of Constructional Steel Research . 2005 (6)

Investigation on Vierendeel mechanism in steel beams with circular web openings [J] . K.F Chung,T.C.H Liu,A.C.H Ko. Journal of Constructional Steel Research . 2001 (5)

Castellated Beam Web Buckling in Shear [J] . Richard Redwood,Sevak Demirdjian. Journal of Structural Engineering . 1998 (10)

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

火灾高温作用下波纹腹板钢梁剪切屈曲系数研究