Hill H N,Hartmann E C,Clark J W.Design of aluminum alloy beam-columns[J].ASCE Trans,1953,121:1-21.

Clark J W.Eccentrically loaded aluminum columns[J].ASCE Trans,1953,120:1 116-1 132.

Frey F.Lateral buckling and eccentric buckling of alu-alloy columns,beams,and bean-columns[J].ECCS Committee,1977,16:16-77.

Chapuis J,Galambos T.Restrained crooked aluminum columns [J].ASCE ST3,1982,3:511-24.

张铮,张其林.H形截面铝合金偏压构件平面内稳定承载力的试验及理论研究[J].建筑结构学报,2006,27(5):9-15.??????? Zhang Zh,Zhang Q L.Experimental and theoretical research on in-plane stability capacity of H-section aluminum beam-columns[J].Journal of Building Structures,2006,27(5):9-15.(in Chinese)

郭小农,沈祖炎,等.铝合金偏心受压构件理论和试验研究[J].建筑结构学报,2007,28(6):136-146.??????? Guo X N,Shen Z Y,et al.Theoretical and experimental research on aluminum alloy members under eccentric compression[J].Journal of Building Structures,2007,28(6):136-146.(in Chinese)

孙丽娟.6082-T6铝合金箱形与L形截面偏压构件稳定承载力研究[D].黑龙江:哈尔滨工业大学,2014.??????? Sun L J.Stability bearing capacity research of 6082-T6 aluminum alloy beam-column with box-type and L-type sections[D].Heilongjiang:Harbin Institute of Technology,2014.(in Chinese)

翟希梅,孙丽娟,赵远征.6082-T6铝合金箱形与L形截面偏压构件稳定承载力研究[J].建筑结构学报,2015,36(9):10-19.??????? Zhai X M,Sun L J,Zhao Y Zh.Stability bearing capacity research of 6082-T6 aluminum alloy beam-column with box-type and L-type sections[J].Journal of Building Structures,2015,36(9):10-19.(in Chinese)

EN1999-1-1:2000 Eurocode 9:Design of aluminum structures-General rules and rules for buildings[S].London:BSI Group,2007.

? Specifications for aluminum structures[S].Washington D.C.:The Aluminum Association,2005.

? Aluminum structures Part 1:Limit state design,Australian/New Zealand Standard AS/NZS 1664.1:1997[S].Sydney,Australia:Standards Australia,1997.

? 铝合金结构设计规范:GB50429—2007[S].北京:中国计划出版社,2007.??????? Code for design of aluminium structures:GB50429—2007[S].Beijing:China Planning Press,2007.(in Chinese)

? 韩川.铝合金偏压构件抗火性能试验研究[D].上海：同济大学,2013.??????? Han Ch.Experimental research on structural behavior of aluminum alloy members at elevated temperature[D].Shanghai:Tongji University,2013.(in Chinese)

? 黄力才.高温下铝合金梁和柱构件承载力研究[D].上海:同济大学,2013.??????? Huang L C.Research on load-bearing capacity of aluminum alloy beams and columns at elevated temperatures[D].Shanghai:Tongji University,2013.(in Chinese)

? 林维春.高温下铝合金构件极限承载力实用计算方法[D].上海:同济大学,2016.??????? Lin W Ch.Practical methods for the ultimate bearing capacity of aluminum alloy members at elevated temperature[D].Shanghai:Tongji University,2016.(in Chinese)

? 郭小农,沈祖炎,李元齐,等.国产结构用铝合金材料本构关系及物理力学性能研究[J].建筑结构学报,2007,28(6):110-117.??????? Guo X N,Shen Z Y,Li Y Q.Stress-strain relationship and physical-mechanical properties of domestic structural aluminum alloy[J].Journal of Building Structures,2007,28(6):110-117.(in Chinese)

? Design of aluminum alloy structures?Part 1?2:Structural fire design:EN1999?1?2 Eurocode 9[S].Brussels:European Committee for Standardization,2007.

? 黄玮嘉.铝合金偏压构件高温承载力研究[D].上海:同济大学,2017.??????? Huang W J.Research on bearing capacity of aluminum alloy members under eccentric compression at elevated temperatures [D].Shanghai:Tongji University,2017.(in Chinese)